on
TR2025 Anti-Static Thin-Coat Topcoat
TR2025 is a two-component anti-static topcoat consisting
of components A and B. It is designed to reduce the generation
and accumulation of electrostatic charges and is mainly used
as a decorative anti-static finish for floors, worktops and
walls in industries sensitive to static electricity.
of components A and B. It is designed to reduce the generation
and accumulation of electrostatic charges and is mainly used
as a decorative anti-static finish for floors, worktops and
walls in industries sensitive to static electricity.
Application Areas
Anti-static intermediate coating surfaces
Cement mortar surfaces
Lime-rendered wall surfaces
Metal surfaces
Technical Data
| Property | TR2025A | TR2025B |
|---|---|---|
| Color & Appearance | Colored liquid | Transparent liquid |
| Density at 25°C | 1.35 g/cm³ | 0.90 g/cm³ |
| Viscosity at 40°C | 4000–5000 mPa·s | 100–200 mPa·s |
| Mixing Ratio by Weight | 100 | 50 |
| Drying Time at 25°C |
Touch dry: < 8 hours Full cure: < 24 hours |
|
| Surface Resistance After Curing | 105–109 Ω | |
| Abrasion Resistance (700 g / 500 cycles) |
≤ 0.05 g | ≤ 0.05 g |
Substrate Requirements
1
The substrate must be dry and free from moisture,
with a moisture content below 6%.
with a moisture content below 6%.
2
The substrate must be sound and solid, without hollow
areas, cracks, loose material or powdering.
areas, cracks, loose material or powdering.
3
The surface must be free from oil, grease and other
contaminants.
contaminants.
Recommended Application
1
Apply by roller or brush. Recommended consumption is
approximately 0.125 kg/m² per coat.
approximately 0.125 kg/m² per coat.
2
Add the required amount of component B to component A
according to the specified mixing ratio and mix thoroughly.
according to the specified mixing ratio and mix thoroughly.
3
Application is recommended at temperatures above 10°C
and relative humidity below 80% RH.
and relative humidity below 80% RH.
4
Mixed material should be used as soon as possible.
Prolonged storage after mixing may increase viscosity
and eventually cause the material to cure and become unusable.
Prolonged storage after mixing may increase viscosity
and eventually cause the material to cure and become unusable.
5
Minimum recoating interval: 2 hours.
6
Clean all tools and equipment with an appropriate
organic solvent after finishing work each day.
organic solvent after finishing work each day.
Packaging & Storage
TR2025A: 30 kg / pail
TR2025B: 15 kg / pail
Store sealed in a cool, well-ventilated place
Shelf life: 6 months
Reseal immediately after opening
Health & Safety
1
Keep the working area clean and well ventilated.
Mechanical extraction should be provided where necessary.
Mechanical extraction should be provided where necessary.
2
Wear suitable protective gloves during application.
3
Avoid direct contact with skin and eyes. In case of
accidental contact, wash thoroughly and seek medical
attention when required.
accidental contact, wash thoroughly and seek medical
attention when required.
4
Spilled material may be absorbed with cloth or sand.
Cleaning solvents should be handled with appropriate care.
Cleaning solvents should be handled with appropriate care.
5
Dispose of cured material and waste in accordance with
applicable local environmental regulations.
applicable local environmental regulations.